Registered: 7 months, 1 week ago
How Glitter is Made
The glitter that we sell is made from two different types of film. The Craft Glitter is made from PVC film and the Polyester Glitter is made from PET films. The iridescent line combines both PET and acrylic together.
The metallic glitters are made from film that could be a single strong color.
The holographic glitter is made from film that already has the holographic quality. The identical goes for iridescent. The films are colored and handled before they're cut.
There are different types and sizes of machines which are used for cutting glitter. Most machines have blades that reduce the glitter into both hex form pieces or square form items depending on how the film is fed into it. Different machines die-lower shapes from the film. With some machines, the hex form flakes are fed in at an angle and sq. flakes are fed straight in. Totally different blade configurations are used based on the size of the flake.
There are totally different applied sciences used by completely different companies of course.
his is an finishless subject as there are so many differences between really good glitter and really bad glitter. First the film matters an entire lot. High-high quality film is going to present you great glitter.... or is it?
You possibly can take nice film and run it via a badly set up machine and you'll not get a clean cut. If you happen to take a look at low-cost glitter, you'll not only see that the flakes usually are not uniform in shape, but you will see little flecks of film that should not be there at all.
Plenty of bad glitters come from outside the US the place they use cheap film and operate machines that are not well arrange or have poor blades. Glitter from other international locations are also a wild card- is it really non-poisonous or are they just saying so? Reality in advertising shouldn't be the identical around the world as it's here within the USA.
Finally, there are coatings on films. For instance, if you happen to buy a cheap metallic glitter it most likely does not have an epoxy coating (ours does). This could not matter too much in case you are using it for simple crafts. Nonetheless, it issues a lot if you are using it for floors, boats and in solvents!
If you enjoyed this post and you would such as to obtain even more info relating to wholesale glitters kindly see the web site.
Topics Started: 0
Replies Created: 0
Forum Role: Participant