Striping chrome off aluminum

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #31992
    bake
    Member

    I have a swingarm and a set of my own fork tubes to coat but they had a poor chrome job done and it’s peeling. So far I tried heating in the oven at 450 for 1 hour then blasting with glass beads at 60 psi but it is taking forever. Is there a better way or media I should be using?

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.
Back to top button