Sprayer and Compressor Compatibility

This topic has 1 reply, 2 voices, and was last updated 4 years, 11 months ago by Sean W.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
January 26, 2017 at 5:33 pm #35722

victorjr24
Member

So I am looking at the Devilbiss Finishline 4 Solvent Based Kit and a 60 gal Husky. Will the compressor support the stayer well for the base and clear on a small car. I have a 77 280z datsun

Sprayer– https://www.eastwood.com/devilbiss-finishline-4-solvent-based-kit.html
Compressor– http://www.homedepot.com/p/Husky-60-Gal-Stationary-Electric-Air-Compressor-C602H/205389936

August 15, 2017 at 11:32 am #36276

Sean W
Participant

A 60 gallon compressor will work fine to run a finishline 4 paint gun. This gun requires 13 cfm at 23 psi.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.