Shearing corners

Posted: January 12, 2006 By: F-5 Performance

Home Forums Metal Shop Metal Shop Archives Shearing corners

Viewing 1 post (of 1 total)
  • Author

    Posts

  • #28312

    I have a question and I don’t know who to ask but I figured I would start here first. I am a powder coater but I dabble in manufacturing as well.
    I have some 29″L x 2.5″W by 1/8″ Thick aluminum Tread Brite strips that I need to round the corners on all 4 sides. I need to know the quickest and easiest way to do this that hopefully will not end in my having to sand off burrs on each corner. These pieces are sheared off a 16 foot piece of Tread Brite and I have a lot of them. Like 400. Any ideas? I will be making these for awhile so I would prefer to buy a tool that I can set up in my garage to do this with.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Top Selling Products

Comments are closed