rust encapsulator
- This topic has 0 replies, 1 voice, and was last updated 11 years, 10 months ago by .
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
Just wanting to make sure I am using the encapsulator the proper way. I am rebuilding a 41 Dodge. I have been blasting all the small parts that will fit in my cabinet. These parts are very rusty. I have been cleaning them down to bare metal, but most parts still have some pits that are hard to get all the rust out of. I have been encapsulating them with 2 coats of the encapsulator, a coat of eastwood primer and then top off with 2 coats of chassis black. Is this the proper procedure? I just don’t want to see rust 10-15 years down the line. Thanks