eastwood soda blaster problem

Posted: February 18, 2012 By: jeff56

Home Forums Ask Eastwood eastwood soda blaster problem

Viewing 1 post (of 1 total)
  • Author

    Posts

  • #34169

    jeff56

    Member

    Hi,
    I just got one of the soda blasters,which says it reqiures 7-25 cfm,in the manual,however,in the ad when I purchased,it stated to need 10-25 cfm.Changed out to the soda fittings(came with it)…..tried all different tips.
    I am trying to use 2 compressors,combined are about 9 cfm,and it is not working…..works a little bit,but wont continuosly blast media,just air……I take it,I need a bigger compressor.
    I cannot get a 220 volt AC,but can get a larger 110 voltAC,which could get me up to 12=13 cfm…..would this possibly work?
    thanks for any info

    jeff

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Top Selling Products

Comments are closed