Eastwood 175 – no gas at tip
- This topic has 0 replies, 1 voice, and was last updated 11 years, 3 months ago by
.
Viewing 1 post (of 1 total)
-
Posts
-
I just set up my welder. The regulator is showing 25 CFH, but no gas is coming out at the gun.
The gun is plugged into the welder correctly, so that the gas O-rings are seated properly around the gas port.
I don’t see any control or adjustments on the welder itself for controlling the gas.
When I take the hose off between the welder and the regulator, the CFH drops to 0… so I know the gas is getting into the welder, and not coming out of the gun.
Help!
—
TJ
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.