Bondo over Rust encapsulator?

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #26797
    Chucksdart
    Member

    I bought a gallon of the red rust enc. for the underside of the floor pans. Some spots have some pretty deep pits. Assuming the rust enc. should be applied directly to the freshly sanded and wire brushed floor pan, is it alright to apply the euro-soft glazing putty over the rust encapsulator to hide some of the pitting? If so , what sort of preparation is required? Thank you for the forum. This is great for us novices! 😀

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.
Back to top button