Read a few searched articles on air setup. I wanted to know if it is dead on neccessary just starting out to have air supply running through piping. I recently got a speedaire 5hp 90gal compressor and blast cabinet from a shop that was closing.I bought a 50 foot rubber hose for now and was wondering if this will work for now for blasting/pcing.
on other question, the tank has the standard regulator/filter at the tanke exit. I bought a second smaller filter, my question is, Is it sufficiant to place this second water trap at the end of the hose, then attach to what ever equipment I am using?
So close to setting up the shop, got a electrician stopping by this week to set up power for compressor and oven, and im ready.