2K Aero-Spray Info?

Posted: June 21, 2013 By: XG300

Home Forums Ask Eastwood 2K Aero-Spray Info?

Viewing 1 post (of 1 total)
  • Author

    Posts

  • #34844

    XG300

    Member

    I purchased some 2k Aero-Spray Primer & Chassis Black cans. These products did not come with the information needed to use them properly, nor could I find info sheets on them:

    Primer
    Flash Time: ?
    Recoat Window: 18-20 hrs (from forum post)
    Minimum Allowed Temperature: ?
    Time to Full Cure: ?

    Chassis Black
    Flash Time: ?
    Recoat Window: ?
    Minimum Allowed Temperature: ?
    Time to Full Cure: ?

    My guess would be to wait 30 minutes between primer coats. Let it dry overnight and then topcoat with the chassis black. Not sure how long to wait between the topcoats. I can take some parts inside at night but my car frame has to stay outside. Will I have to run a heater under my car at night?

    If I wanted to spray my undercarriage afterwards with rubberized undercoating for sound deadening purposes, should I wait until the paint is fully cured, or apply it within the recoat window?

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Top Selling Products

Comments are closed